Lights – HONDA 2004 Civic Hybrid - Owner's Manual User Manual

Page 167

Advertising
background image

Open the trunk.

Remove the screws in the center
of each of the two fasteners on the
side of the trunk lining. Pull the
lining back.

Determine which of the two bulbs
is burned out: stop/taillight/side
marker light or turn signal light.

Remove the socket by turning it
one-quarter turn counterclockwise.

Test the lights to make sure the
new bulb is working.

Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.

Reinstall the socket into the light
assembly by turning it clockwise
until it locks.

Reinstall the trunk lining. Make
sure it is installed under the edge
of the trunk seal.

Put the fasteners into the holes on
the side of the trunk lining.
Reinstall the screws.

1.

2.

3.

4.

5.

6.

7.

8.

Lights

Maintenance

Replacing Rear Bulbs
(in Fenders)

164

FASTENERS

BULBS

SOCKETS

Main Menu

Table of Contents

Advertising