Service station procedures – HONDA 2003 Civic Hybrid - Owner's Manual User Manual

Page 150

Advertising
background image

If you can open the hood without
lifting the hood latch handle, or the
hood latch handle moves stiffly or
does not spring back as before, the
mechanism should be cleaned and
lubricated (see page

).

Pull the support rod out of its clip
by holding the grip and insert the
end into the hole on the front left
side of the hood.

To close the hood, lift it up slightly to
remove the support rod from the
hole. Put the support rod back into
its holding clip. Lower the hood to
about a foot (30 cm) above the
fender, then let it drop.

After closing the hood, make sure it
is securely latched.

3.

212

CONTINUED

Service Station Procedures

Bef ore Driving

147

GRIP

SUPPORT ROD

CLIP

Main Menu

Table of Contents

Advertising