HONDA 2003 Civic Hybrid - Owner's Manual - Manual (Page 205)

Remove the battery and the tray.
Remove the reserve tank
mounting bolt with a wrench, then
remove the coolant tube from the
three clips. Remove the reserve
tank from its holder and drain the
coolant into an appropriate
container.
To remove the reserve tank to
drain the coolant, first remove the
battery.
Disconnect the battery cables
from the terminals. Disconnect
the negative (
) cable first, then
the positive ( ) cable.
Remove the bolt and the nut with
a wrench, and remove the battery
plate. Pull the bottom end of the
stay out of the hole, and remove
the stay and the battery cover.
Remove the cover to access the
drain bolt (see page
). Remove
the drain bolt and washer from the
engine block. Drain the coolant
into an appropriate container.
4. 5.
6.
7.
8.
197
Cooling System
Maintenance 202
DRAIN BOLT
STAY
NUT
BOLT
COVER
TAB BOLT
Main Menu Table of Contents