HONDA 2000 Civic Hatchback - Owner's Manual - Manual (Page 180)

Lights
Replacing Rear Bulbs
1. Open the hatch.
2. Remove the cover from the inside
panel by pulling on its edge.
3. Determine which bulb, taillight,
stop/taillight, back-up light, side
marker light or turn signal is
burned out. Remove the socket for
that bulb by turning counterclock-
wise.
4. Except turn signal bulb
Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
Turn signal bulb
Remove the bulb from the socket
by pushing it in and turning
counterclockwise until it unlocks.
Install the new bulb in the socket.
Turn it clockwise to lock it in place.
5. Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
6. Test the lights to make sure the
new bulb is working.
7. Reinstall the cover.
Maintenance
COVER
Main Menu Table of Contents