HONDA 2000 Civic Hatchback - Owner's Manual - Manual (Page 183)

Lights
4. Turn on the parking lights and
check that the new bulb is
working.
5. Put the lens back on the bulb
holder and push it until it latches.
Put the light assembly back into
the hole. Push it to snap it in place.
Replacing an Interior Light Bulb
1. Remove the lens by carefully
prying on the edge of the lens in
the middle with a fingernail file or
a small flat-tip screwdriver. Do not
pry on the edge of the housing
around the lens.
2. Remove the bulb by pulling it
straight out of its metal tabs.
3. Push the new bulb into the metal
tabs. Snap the lens back in place.
Maintenance
INTERIOR LIGHT
Main Menu Table of Contents