Changing a flat tire – HONDA 2000 Civic Hatchback - Owner's Manual User Manual
Page 195
Advertising
Changing a Flat Tire
6. Loosen the four wheel nuts 1/2
turn with the wheel wrench.
7. Locate the jacking point nearest
the tire you need to change. It is
pointed to by an arrow molded into
the underside of the body. Place
the jack under the jacking point.
Turn the end bracket clockwise
until the top of the jack contacts
the jacking point. Make sure the
jacking point tab is resting in the
jack notch.
8. Use the extension and wheel
wrench as shown to raise the car
until the flat tire is off the ground.
Taking Care of the Unexpected
JACKING POINT
WHEEL WRENCH
EXTENSION
Main Menu
Table of Contents
Advertising