Intellijel Mutamix (DRAFT) - Manual (Page 6)

MAIN mode functions
Intellijel Designs Inc Mutamix Manual v0.1 Draft
Page 6 of 8
[XMODE] - in X-MODE all the ctrl inputs have special functions and no longer act as simple mute/unmute. All of the
buttons at the top act as instant recalls for the 6 stored patterns.
[SAVE] - pick 1 of 6 locations to save the current mute state and gate/pulse selections. The mute states (patterns) are
what you can sequence in X-MODE.
* press and hold SAVE for about 4 seconds to save to EEPROM. The green LED will flash three times quickly to show
saving is complete.
There are 6 memory locations + a 7th which represents the startup pattern (the current edit buffer).
Storing to EEPROM also saves the mode you are in.
[LOAD] - pick 1 of 6 memory locations to load.
* press and hold LOAD for about 4 seconds to LOAD from EEPROM. The green LED will flash three times quickly to show
loading is complete.
[KILL] - disables all i/o (all mute). Press any button to exit this mode
[GATE] - choose which of the 6 ctrl inputs for muting acts as a gate controlled mute (high = on, low = off).
[PULSE] - choose which of the 6 ctrl inputs for muting acts as a pulse controlled toggle