Interlogix MC350-1T-2S User Manual
Page 18
18
1000Base-SX/LX:
Before connecting the other switches, workstation or Media Converter, please do the following:
1.
Set the DIP Switch of SFP Port 1 or Port 2 to the “OFF” position with fiber speed 1000Base-X.
2.
Make sure both sides of the SFP transceiver are with the same media type; for example, 1000Base-SX to
1000Base-SX, 1000Base-LX to 1000Base-LX.
3.
Check whether the fiber-optic cable type matches the SFP transceiver model.
¾
To connect to 1000Base-SX SFP transceiver, use the Multi-mode fiber cable with one side being the male
duplex LC connector type.
¾
To connect to 1000Base-LX SFP transceiver, use the Single-mode fiber cable with one side being the male
duplex LC connector type.
Connect the fiber cable
1.
Attach the duplex LC connector on the network cable to the SFP transceiver.
2.
Connect the other end of the cable to a device, switches with SFP installed, to fiber NIC on a workstation or a Media
Converter.
3.
Check the LNK/ACT LED of the SFP slot on the front of the Industrial Gigabit Media Converter. Make sure that the
SFP transceiver is operating correctly.
100Base-FX:
Before connecting the other switches, workstation or Media Converter, please do the following:
1.
Set the DIP Switch of SFP Port 1 or Port 2 to the “ON” position with fiber speed “100FX”.
2.
Make sure both sides of the SFP transceiver are with the same media type or WDM pair; for example, 100Base-FX
to 100Base-FX, 100Base-BX20-U to 100Base-BX20-D.
3.
Check the fiber-optic cable type match the SFP transceiver model.
¾
To connect to SXX-FX SFP transceiver, use the multi-mode fiber cable with one side being the male duplex LC
connector type.
¾
To connect to SXX-F20/F40/F60/FA20/FB20 SFP transceiver, use the single-mode fiber cable with one side
being the male duplex LC connector type.
ON
OFF
Port 1 (DIP 1)
100FX
1000X
Port 2 (DIP 2)
100FX
1000X
ON
OFF
Port 1 (DIP 1)
100FX
1000X
Port 2 (DIP 2)
100FX
1000X