Interlogix MC350-1T-2S - Manual (Page 21)

21
2.2 Mounting Installation
This section describes how to install the Industrial Gigabit Media Converter and makes connections to it. Please read the
following topics and perform the procedures in the order being presented.
In the installation steps below, this Manual uses IGS-801(IFS 8 Port Industrial Gigabit
Switch) as the example. However, the steps for IFS Industrial Switch and Industrial Media
Converter are similar.
2.2.1 Install DIN-Rail Mounting
The DIN-Rail is screwed on the Industrial Gigabit Media Converter when out of factory. When replacing the wall mount
application with DIN-Rail application on Industrial Gigabit Media Converter is needed, please refer to following figures to
screw the DIN-Rail on the Industrial Gigabit Media Converter. To hang the Industrial Gigabit Media Converter, follow the
following steps:
Step 1: Screw the DIN-Rail on the Industrial Gigabit Media Converter.
Step 2: Lightly insert the DIN-Rail into the track.