Interlogix NS3702-24P-4S User Manual - Manual (Page 195)

195
The Page includes the following fields:
Object Description
 VLAN ID VLAN ID of the group.
 Group Group address of the group displayed.
 Port Switch port number.
 Mode Indicates the filtering mode maintained per (VLAN ID, port number, Group
Address) basis. It can be either Include or Exclude.
 Source Address IP Address of the source. Currently, system limits the total number of IP source
addresses for filtering to be 128. When there is no any source filtering address,
the text "None" is shown in the Source Address field.
 Type Indicates the Type. It can be either Allow or Deny.
 Hardware Filter /
Switch
Indicates whether data plane destined to the specific group address from the
source IPv4/IPv6 address could be handled by chip or not.
Buttons
Auto-refresh : Automatic refresh occurs every 3 seconds.
: Refreshes the displayed table starting from the input fields.
: Updates the table starting from the first entry in the MVR SFM Information Table.