3 installing the sfp transceiver – Interlogix NS3702-24P-4S User Manual User Manual
Page 28
Advertising

28
Step 5:
After the brackets are attached to the Managed Switch, use suitable screws to securely attach the brackets to the rack
, as
shown in
Figure 2-2-3
.
Figure 2-2-3:
Mounting Managed Switch in a Rack
Step 6:
Proceed with Steps 4 and 5 of session 2.2.1 Desktop Installation to connect the network cabling and supply power to the
Managed Switch.
2.2.3 Installing the SFP Transceiver
The sections describe how to insert an SFP transceiver into an SFP slot. The SFP transceivers are hot-pluggable and
hot-swappable. You can plug in and out the transceiver to/from any SFP port without having to power down the Managed Switch, as
the
Figure 2-2-4
shows..
Figure 2-2-4:
Plug-in the SFP Transceiver
Advertising