Interlogix TruVision Camera Mounts - Manual (Page 7)

TruVision Dome Brackets Installation Manual 5
2. Screw the cup base onto the swan-neck bracket
and fasten with the locking screw, as shown.
3. TVD-CB5 only:
Using the enclosed screws, attach the cup base
to the camera housing.
4. Loosen the screws on the dome enclosure (1)
using the supplied hex wrench, and remove the
enclosure and dome liner (2).
5. Connect the cables to the dome camera.
6. Insert the dome module into the cup base (TVD-
CB5A shown) and attach using the enclosed
screws.
7. Re-attach the dome liner and enclosure to the
camera.