Interlogix TruVision Camera Mounts - Manual (Page 9)

TruVision Dome Brackets Installation Manual 7
To mount an indoor wall-mount bracket:
1. Pull the camera cables through the TVD-M2-WM
bracket tube and then attach the bracket to the
wall with the expansion screws (A) provided.
2. Attach the mounting plate to the bracket.
Note: The mounting plate is shipped with the
dome camera.
3. Loosen the screws on the dome enclosure using
the supplied hex wrench and remove the dome
enclosure and liner from the dome module.
4. Connect the cables to the dome camera.
5. Using the enclosed screws, attach the dome
module of the camera to the bracket.
6. Re-attach the dome liner and enclosure to the
camera.
2-inch dome wedge cameras
Use the TVD-SNB bracket and the TVD-CB2 cup base. See “Bracket and cup base description” on
page 2 for examples of the assembled brackets.
To mount a swan-neck bracket on a wall:
1. Pull the camera cables through the bracket tube
and then attach the swan-neck bracket to the
wall with the expansion screws (A) provided.
2. Using four screws, attach the converter pan
(TVD-M2 WEBM) to the cup base.