Interlogix KTD-405 Series User Manual - Manual (Page 53)

Chapter 4
Operation
49
Selecting and controlling a DVMRe/multiplexer
When a zone is active, the corresponding DVMRe/multiplexer can be controlled by the keypad (Table 5).
Table 5. Controlling a multiplexer
Control Function for multiplexer Function for DVMRe
starts record mode starts record mode
starts playback mode (if multiplexer has an attached
DSR/VCR, a play command is sent to the multiplexer
and the VCR) starts playback mode
stops playback or record mode stops playback or record mode
pauses live picture; pauses playback pauses playback or live view
toggles image between normal and 2X magnification
(joystick moves view) zooms image to 2X magnification (toggle)
calls up screen to search for specific recording
puts DVMRe in playback mode
Joystick when attached to a DSR/VCR in pause mode
twisting right: steps forward at a variable rate
twisting left: steps in reverse at a variable rate
in any mode with 2X magnification
right: pans right
left: pans left
up: pans up
down: pans down
in play or pause mode
right: fast forwards
left: rewinds
up: skips forward approximately 15 sec
down: skips backward approximately 15 sec
twisting right: steps forward at a variable rate
twisting left: steps in reverse at a variable rate
return to center: resumes pause mode
with 2X magnification on
right: pans right
left: pans left
up: pans up
down: pans down
fast forwards playback fast forwards playback
rewinds playback rewinds playback
in pause mode, steps forward one frame in reverse: shifts play direction to forward
in pause mode: steps playback forward one frame
in pause mode, steps in reverse one frame playing forward: shifts play direction to reverse
in pause mode: steps playback in reverse one frame