Interlogix 2800T Series - Manual

R
R
Switch and magnet housings shall be die cast aluminum, coated
with brown textured paint. Switch housing dimensions shall be
nominally 1.5" (3.81 cm) W x 5.75" (14.61 cm) L x 2.0" (5.08 cm)
H. Mounting holes for #10 screws shall be on 5.25" (13.34 cm) x
.75" (1.91 cm) centers. Switch housing lid shall be attached on
5.25" (13.34 cm) x 1.5" (3.81 cm) spacing with #10-24 screws.
Fitting with .50" threads shall be provided for direct connection to
conduit. Magnet housing dimensions shall be nominally 5.75"
(14.61 cm) L x .813" (2.06 cm) H x 1.5" (3.81 cm) D. Mounting
holes for #10 screws shall be on 5.25" (13.34 cm) centers.
Switch shall comprise three biased reed contacts, wired in SPDT
configuration, and include a plunger-type tamper actuated on
removal of cover. Connection to switch shall be made by screw
terminals.
2807T, 2808T
Switch shall include a magnetic tamper switch and an optional pry
tamper switch. It shall be fastened to the mounting surface with a
pry tamper plate mounted with #6 x .75" flathead screws on 2"
centers. Model 2808T shall include a remote test function.
2804T
Switch shall include a magnetic tamper switch and optional circuit
breaker-type switch protection at 80% of maximum current. Switch
shall also include a tamper resistant, two-piece magnet.
2800 SERIES
ARCHITECTS' AND ENGINEERS' SPECIFICATIONS
2800T SERIES
Installation Instructions
Models: 2804T, 2807T, 2808T
2808T SERIES
2.00"
5.08cm
5.75"
14.61cm
5.25"
13.34cm
#10-24 thread
Conduit
(.50 threads)
.75"
1.92cm
1.50"
3.81cm
Mounting holes not accessible
when cover is in place.
Switch
Magnet
Mounting holes not accessible
when cover is in place.
.813"
2.06cm
2807T, 2804T SERIES
Magnetic Tamper
Lid-Tamper
Pry Tamper
1 2 3 4 5 6
Open loop N/C
Closed loop N/O
Common
W/pry tamper W/o pry tamper Common
Closed Loop
Open Loop
Common No Label
Supervised Common
Magnetic Tamper Only
Pry/Tamper/Magnetic
Tamper
Closed Loop
Open Loop
Common
Remote Test (12V; 1K ohm coil)
Lid Tamper Only
Pry Tamper/Lid Tamper
Remote Test
Supervised Common
Secure Position Pry Tamper
Remote Test/Magnetic Tamper
1 2 3 4 5 6 7 8
Closed LoopOpen Loop
Common
Supervised Common
Remote Test Remote Test Lid Tamper Only Pry Tamper/Lid Tamper