Philips AZ 1011 - Manual (Page 13)

Recording
General information on
recording
• Recording is pemnissible insofar as copyright or
other rights of third parties are not infringed.
• This deck is not suited for recording on
CHROME (lEC II) or METAL (lEC IV) type
cassettes. For recording, use only NORMAL
type cassettes (lEC type I) on which the
tabs have not been broken.
• The best recording level Is set automatically.
Altering the VOLUME and DBB controls
will not affect the recording in progress.
• At the very beginning and end of the tape,
no recording will take place during the
7 seconds when the leader tape passes the
recorder heads,
• To protect a tape from accidental erasure,
have the tape in front of you and break out
the left tab. Recording on this side is no
longer possible.To record over this side
again, cover the tabs with a piece of
adhesive tape.
Synchro Start CD recording
1 Select CD source.
2 Insert a CD and if desired, program track
numbers,
3 Press STOP*OPEN HA to open the
cassette door Insert a blank tape.
4 Close the cassette door.
5 Press RECORD • to start recording.
Playing of the CD program starts
automatically from the beginning of the
program. It is not necessary to start the
CD player separately.
For brief interruptions press PAUSE II.To
resume recording, press PAUSE II again.
To stop recording
To stop recording, press STOP*OPEN HA.
^ The CD player goes to pause mode.
Press PLAY«PAUSE Hi to resume CD
playback, or press STOP ■ to stop CD
play.
Selecting and recording a particular
passage
During CD playback, press and hold down
the SEARCH buttons m or on the set
to find your passage.
Press PLAY*PAUSE ►II to put the CD
player on pause at the selected passage,
^ Recording will begin from this exact
point in the track when you press
RECORD •
Note: If you press RECORD • during
playback, recording starts automatically from
the beginning of the current track.
Recording from the Radio
Adjust the source selector to AM or FM to
select your desired waveband.
Tune to the desired radio station (see
Radio reception).
Press STOP*OPEN BA to open the
cassette door. Insert a blank tape.
Close the cassette door
Press RECORD • to start recording.
For brief interruptions, press PAUSE II,To
resume recording, press PAUSE II again.
To stop recording,
press STOP*OPEN BA
13