Capresso Z5 - Manual (Page 9)

T) Programming
The Z5/Z6 provides programming, maintenance and look-up
functions. For details see chapter 26 in the Operating
Instructions.
COFFEE READY
Push and hold the Rotary Dial until the Display shows
FILTER . Turning the dial clockwise lets you access the func-
tions listed below. To get back to COFFEE READY turn until
the display shows EXIT and push the Rotary Dial. If you want
to get into a function, push the Rotary Dial again, and sub-
functions will appear. Turning the Dial will show you different
options within the sub-functions.
Function
• Sub-functions Comment
FILTER NO
• FILTER YES Install and activate the Clearyl Filter
• FILTER NO
HARDNESS 10º DH When not using the Clearyl cartridge,
• Not active or set the hardness to your water.,
• Six hardness levels See chapter 24 Operating Instructions.
MAINTENANCE
• RINSE UNIT Allows you to run extra cleaning
• CAPPUCCINO cycles, even if the Z5/Z6 does not
CLEANING prompt you to do so.
• CHANGE FILTER
• CLEAN UNIT
• CAPPUCCINO
RINSING
• DECALCIFY UNIT
TEMPERATURE
• LOW Change the temperature for each
• NORMAL coffee button, see chapter 26.2
• HIGH Operating Instructions
AROMA
• XMILD Change the coffee strength for
• MILD each coffee button. The amount of
• NORMAL ground coffee varies between approx.
• STRONG 5 and 16 grams.
• XSTRONG
CAPPUCCINO Change the pre-sets without brewing.
MILK Change the pre-sets without brewing
ENERGY
• SAVE NO NO: Z5/Z6 is always ready
• SAVE LEVEL 1 Level 1: heats up for steam
• SAVE LEVEL 2 Level 2: heats up for water and steam
TIME Set actual time