Cyclades AlterPath BladeManager - Manual (Page 131)

Blades / Switches
AlterPath BladeManager Manual 4-49
4. Complete the Console Detail form, as necessary.
5. Click on Save to complete the procedure.
Adding a Switch Console
Adding a switch console follows the same procedure, except you have to
select Switch when the system prompts for the console type. Be sure that you
have set the switch to Enable (go to Chassis > Switch) in the switch device
form otherwise you will receive an error message.
>> Selecting Users to Access the Console
Use the Console Access form to assign and authorized one or more users to
access the current blade console.
1. From the Console Detail form (Consoles: Console List > Console Detail),
click on the Access button.
Status Drop down list. Enable, Disable, OnDemand.
Log Rotation Frequency of the automatic log rotation
process (Never, Daily, Weekly, Monthly).
Back Button to revert to the last page or form.
Save Button to save the configuration.
Logrotate Now This field appears only if you selected Edit
instead of the New button from the Console
List form.
Use this button to close and compress the
console buffer log file, and to open a new file
to receive new log entries. This operation
overrides the Log Rotation automatic setting.
Table 4-10: Consoles Detail Form - Fieldnames and Elements
Fieldname Definition