Jeep 2011 Wrangler - Manual (Page 153)

NOTE: The engine must be running before the head-
lights will turn on in the Automatic mode.
Turn Signals
Move the multifunction lever up or down and the arrows
on each side of the instrument cluster flash to show
proper operation of the front and rear turn signal lights.
NOTE:
• If either light remains on and does not flash, or there is
a very fast flash rate, check for a defective outside light
bulb. If an indicator fails to light when the lever is
moved, it would suggest that the indicator bulb is
defective.
Headlight Switch Turn Signal Operation
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151