Raising the windshield and replacing side bars, Raising the windshield and replacing side, Bars – Jeep 2011 Wrangler User Manual
Page 259
Advertising
11. Remove the lower windshield plates by removing the
six black round-headed Torx
head screws (using a #40
Torx
head driver) on each side of the base of the
windshield.
12. Lower the windshield gently until it contacts the
rubber hood bumpers.
13. Secure the windshield by passing a cinch strap
through the footman hoop on the center of the hood and
on the center of the windshield frame. Tighten the strap
to secure the windshield in place.
Raising The Windshield And Replacing Side Bars
1. Raise the windshield.
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
257
Advertising