Instrument cluster descriptions – Jeep 2011 Wrangler User Manual

Page 268

Advertising
background image

INSTRUMENT CLUSTER DESCRIPTIONS

1. Fuel Gauge
The pointer shows the level of fuel in the fuel tank.

2. Charging System Light

This light shows the status of the electrical charg-
ing system. The light should come on when the

ignition switch is first turned to ON/RUN, and remain
on briefly as a bulb check. If the light stays on or comes
on while driving, turn off some of the vehicle’s non-
essential electrical devices or increase engine speed (if at
idle). If the charging system light remains on, it means
that the vehicle is experiencing a problem with the
charging system. Obtain SERVICE IMMEDIATELY. See
an authorized dealer.

If jump starting is required, refer to “Jump Starting
Procedures” in “What To Do In Emergencies”.

3. Front Fog Light Indicator — If Equipped

This indicator will illuminate when the front fog
lights are on.

4. Low Fuel Warning Light

When the fuel level reaches approximately 2.8 gal
(10.6L) this light will turn on and a single chime
will sound.

5. Speedometer
Indicates vehicle speed.

6. Front Axle Lock Indicator — If Equipped

Indicates when the front axle lock has been
activated.

7. Seat Belt Reminder Light

When the ignition switch is first turned to ON/
RUN, this light will turn on for four to eight
seconds as a bulb check. During the bulb check, if

266

UNDERSTANDING YOUR INSTRUMENT PANEL

Advertising