Rear hard top installation, Door frame – Jeep 2011 Wrangler User Manual

Page 189

Advertising
background image

CAUTION!

The removal of the Freedom Top requires four adults
located on each corner. Failure to follow this caution
could damage the Freedom Top.

Rear Hard Top Installation

NOTE:

If the door frames are installed from soft top

usage, they must be removed prior to installation of the
hard top.

1. Inspect the hard top seals for damage and replace if
necessary.

2. Install the hard top using the same steps for removal
in reverse order.

Make sure that the hard top is sitting flush with the body
at the sides and check to ensure that there is a uniform
gap between the lift glass and hard top.

NOTE:

• The Torx fasteners that attach the hard top to the body

should be torqued to 66 in lb +/- 22 in lb (7.5 N·m +/-
2.5 N·m)

• It is not necessary to pinch connection when reinstall-

ing washer hose. Push on until click is heard.

DOOR FRAME

WARNING!

Do not drive your vehicle on pavement with the door
frame(s) removed as you will lose the protection that
they can provide. This procedure is furnished for use
during off-road operation only.

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

187

Advertising