Canon CX-1 - Manual (Page 23)

-11-
5. Basic Photography
5.1 Before Taking Photographs
5.1.1 Turn On the Power
1 Remove the dust cover and the objective lens cap.
2 Turn on the computer.
Turn on the computer, and start the control software.
3 Turn on the power switch of the digital camera.
Set the power switch of the digital camera to or
.
4 Turn on the power of the retinal camera.
Press the power switch of the retinal camera to the I
side (ON).
Concerning control software operations
For details on the control software operations, refer to the operation manual of the control
software.
Concerning the power-saving function
The power-saving function is activated under the following circumstances.
• When none of the switches on the operation panel has been operated for 10 or more minutes
while power is supplied to the camera
• When none of the switches on the operation panel has been operated for 1 or more minutes
after the operation to stop the timer has been performed during fluorescein angiography
photography
When the power-saving function has been activated, the POWER lamp on the operation panel
blinks.
To restore normal operation, press any switch on the operation panel, move the stage to the left or
right or operate the diopter compensation lever.
OFF ON