CK Electric Part C3000 - Manual (Page 128)

Cop
ying and
Scanning
❍ Scan Mode
Selects the type of image you are scanning (letter,
graphics, or photo). The type you select determines a
black and white or grayscale scanned image and the
resolution for the image.
To define custom settings, select Custom. See Advanced
Scanning Options on page 6-7 for details.
❍ Brightness
Use this scroll bar to darken or lighten the brightness of
your scanned image.
❍ Contrast
Use this scroll bar to set the level of contrast for your
scanned image.
❍ View after scan
Enable this option if you want the scanned image to
display automatically in the MultiPASS Desktop Manager
when the scan is complete.
❍ When the scan is complete, the image appears in the
MultiPASS Viewer window (if View after scan is enabled).
❍ The scanned image also appears in the Scan folder with
an assigned number such as SCAN_19. From the Scan
folder, you can save (Export), rename, print, or delete the
scanned image—just like any other file.
❍ You can PC fax a scanned document. For information on
PC faxing, see Chapter 4, Sending Faxes With the
MultiPASS C3000 .
N If you are scanning a business card or post card that is thicker than
0.005 in. (0.13 mm), it may not scan correctly. If you wish to scan a
document that is thicker than 0.005 in. (0.13 mm), scan only one sheet
at a time and push the document slightly to feed it through the sheet
feeder.
To start the
scan, click the
Scan button.
4
In the Scanner
dialog box, specify
the scan options
for your document.
3
Chapter 6 Copying and Scanning With the MultiPASS C3000 6-5
MPC-3000—USERS MANUAL/V000/07-97