CK Electric Part C3000 - Manual (Page 245)

G-4 Glossary
FFiinnee m mooddee
One of the printer’s print modes. Use this mode when printing on
transparencies or printing a halftone image that produces grayscale or
intermediate colors.
FFoonntt
A complete set of characters of the same size and style; a particular
implementation of a typeface. For example, 12-point, Courier bold.
GG33,, GGrroouupp 33 ffaaxx m maacchhiinnee
Defined by CCITT. Uses encoding schemes to transmit image data while
reducing the amount of data that needs to be transmitted, thus reducing
transmission time. Encoding schemes for G3 fax machines are Modified
Huffman (MH), Modified Read (MR), and Modified Modified Read
(MMR).
GGrraayyssccaallee
Representing color in black and white as a result of different intensities
of color. Different colors and intensities of colors appear as different
shades of gray.
GGrroouupp ddiiaalliinngg
A dialing method that enables you to dial up to 55 registered one-touch
speed dialing or coded speed dialing numbers together as a group. This
means that you can press just one to three buttons to enter numbers
when sending the same document to many destinations.
HHaallffttoonnee
Using this method, the MultiPASS (in printer mode) produces shades of
gray or of colors by mapping dots to be printed. For color printing,
different colored dots of ink are placed closely together to create
illusions of other colors.
IIEEEEEE 11228844
IEEE 1284 is the new specification standard for computer-to-peripheral
bidirectional parallel interface communications. The new standard was
adopted by IEEE, Institute of Electrical and Electronic Engineers, Inc., in
1993. Some of the benefits it provides are: bidirectional communication
between computers and peripheral devices, a higher speed data transfer
rate, and protection against data loss due to noise interference.
MPC-3000—USERS MANUAL/V000/07-97