CK Electric Part C3000 User Manual
Page 61
2-36 Printing With the MultiPASS C3000
Chapter 2
MPC-3000—USERS MANUAL/V000/07-97
❍
Insert the sheet with the cloth side out (toward you) and
the open end up (away from the sheet feeder).
❍
Adjust the paper guide to the edge of the fabric sheet.
❍
In the Paper tab, select A4 for the Paper Size and select
Fabric Sheet for the Print Media.
❍
In the Graphics tab, select High for the Print Quality. You
may also want to select Fine mode.
❍
Start the print operation from your Windows application.
❍
Let the printed fabric sheet set for about one hour to
allow the ink to completely dry.
❍
When dry, peel the film backing from the printed fabric
sheet.
❍
Wash the printed fabric sheet for about three minutes
under lukewarm running water to remove extra ink.
❍
Hang the fabric sheet up to dry it again.
❍
Iron the dried fabric sheet with a clothes iron.
Dry and
then wash the
fabric sheet.
4
Set up
the MultiPASS
Printer Driver
for Windows.
3
Insert the
fabric sheet.
2