Engine operation, Pre-operation check – Cub Cadet CSV 050 User Manual

Page 18

Advertising
background image

Engine Operation

9

18

-30º -20º

10w

20w

20

30

40

20w40, 20w50

15w40, 15w50

10w40

10w30

-10º 0º

20º 40º 60º 80º 100º

10º 20º 30º 40º

-20º

(ºC)

(ºF)

1

2

Figure 9-1

Fuel Cap

Air Cleaner

Spark Plug

Oil Fill

Cap

Starter

Grip

Pre-Operation Check

Oil Recommendations

NOTE: This engine is shipped without gasoline or oil in the

engine. Running the engine with insufficient oil can cause

serious engine damage and void the engine warranty.

Before starting engine, fill with oil. Do not over-fill. Oil

capacity is about 20 oz.

Use a 4-stroke, or an equivalent high detergent, premium

quality motor oil certified to meet or exceed U.S. automobile

manufacturer’s requirements for service classification SG/SF.

Motor oils classified SG/SF will show this designation on the

container.
SAE 10W-30 is recommended for general, all temperature use. If

single viscosity oil is used, select the appropriate viscosity for the

average temperature in your area from the chart to the right.

Ambient Temperature

Single Viscosity

1.

Multi Viscosity

2.
NOTE: Using non detergent oil or 2-stroke engine oil could

shorten the engine’s service life.

Advertising