Philips PPC136C - Manual (Page 30)

U sing the R emote ’ s
VCR B uttons
WJh^n using the TV remote
yy with aVCR, first make cer­
tain it is set to control your VCR
(by the REMOTE CODE or
SEARCH method).
(BEGIN!
<i>
I
<l>
Set the TV/VCR/ACC mode
switch to VCR on the remote.
Point the top of the remote
toward the front of the VCR
(remote sensor window) when
pressing the buttons.
RECORD BUTTON •
Hold the (A/CH) • RECORD button
down to begin a VCR recording.
VCR SYSTEM SWITCH
Set in the VCR position to send
remote commands to the VCR.
PT .AY BUTTON b-
Press to begin playback of a
video tape.
REWIND BUTTON
Press to rewind tapes. For some
VCR’s the STOP button may
have to be pressed first, then
REWIND. In playback mode
hold down the button to view
picture moving rapidly in
reverse.
STOP BUTTON ■
Press to stop the motion of a tape
in playback, rewind, fast forward,
etc.
S m a r i H k i . p
Remember, the VCR but-
8 tons on the remote will not
operate your VCR if those features
are not found on your VCR remote
control.
Note: All VCR functions (particularly
Search, Rewind, Fast Forward, etc.)
will operate the same as with the orig­
inal VCR remote control provided
with the VCR.
POWER BUTTON
Press to turn the VCR ON and
OFF.
TV/VCR BUTTON
Press while in the VCR mode (VCR
indicator on the front of the unit
will light) to view the playback of a
tape. Press again to place in the TV
position (VCR indicator light will
go off) to view one program while
recording another program.
NUMBER BUTTON
Press buttons for direct VCR
channel selections.
PAUSE BUTTON II
Press to temporarily stop the tape
during a playback or recording.
Press again to release Pause,
FAST FORWARD BUTTON
Press to rapidly advance the tape.
For some VCR’s you may need
to press the STOP button first,
then the FAST FORWARD but­
ton. In playback mode hold the
button down to view the picture
moving rapidly in the forward
direction.
CHANNEU M- BUTTONS
Press to scan up or down through
the VCR channel numbers.
30