Philips PPC136C - Manual (Page 32)

□I
D
escription of
O
n
-S
creen
C
ontrols
(
commercial
)
contincei
)
LANGUAGE - See page 23 on the use of the English/Francais/or
Español Menu language option control. Note: This control is intend­
ed for onscreen Menu items. The language of Labels, Closed
Captioning, and other Channel Guide information will not change.
CHANNEL INSTALL - See previous page for details on Sub-
Menu containing Program Channel, Input, Label, AJV Blank, and
Auto Program controls.
PROPLUS SETUP - See page 2 and 33 for detail use of the Sub-
Menu eontaining Access Level (Consumer, Commercial, Locked,
Unlocked) and Event programming controls.
CABLE TUNING - See page 10 on the use of the Cable TV chan­
nel selection mode control.
COLOR AD.TUST CONTROT.S - See page 14 for adjustments of
Brightness, Contrast, Noise Reduction, etc. picture controls.
Aumo An.rUST CONTROLS - See page 14 for sound control
adjustments (Bass, Balance, etc.). Page 15 for Incredible Stereo.
Page 16 for Automatic Volume Limiter and Volume Bar.
MTN VOLUME tMiniimim Voliimel - Highlight MIN VOLUME,
then press the Cursor Right (►) or Left (-^ ) buttons to set the min­
imum allowable volume level for TV sound.
MAX VOLUME (Maximum Volmnel - Highlight MAX VOL­
UME, then press the Cursor Right (►) or Left (-^ ) buttons to set
the maximum allowable volume for TV sound.
SWITCH ON VOLUME - Highlight SWITCH ON VOLUME,
then press the Cursor Right (►) button to select a desired volume
level. The volume will be at the preset level every time you turn on
the TV. If STANDARD is selected, the last volume level will be
used.
SWITCH ON CHANNET. - Use this feature to have the TV tune
to the same channel (or signal source) every time you turn ON the
TV. Highlight SWITCH ON CHANNEL, then press the Cursor
Right (►) or Left (-^ ) buttons to select FRONT, AUX, S-VIDEO,
STANDARD, or any channel 1 - 125. (You can also use the
Number buttons to select a channel.) If STANDARD is selected, the
last viewed channel will be used.
POWER ON - Highlight POWER ON, then press the Cursor Right
(►) or Left (-^) buttons to select FORCED. This disables the
POWER button on the front of the TV. The TV is now activated
when the AC power cord is plugged into an outlet. With a consumer
remote, the TV will not turn ON or OFF. In the STANDARD mode.
The TV will return to normal operation.
CHANNEL DISPLAY - Highlight CHANNEL DISPLAY, then
press the Cursor Right (►) or Left (-^) buttons to select ALL,
NONE, NUMBER, or LABEL. “NONE” disables any on-screen
displays, except SLEEP TIMER and MUTE. NONE also disables
the consumer remote’s Number or Channel +,- buttons for channel
selection. “ALL” allows the Channel Number, Channel Label, or
Channel Guide to appear. “NUMBER” allows only the Channel
Number to be displayed onscreen. “LABEL” allows the onscreen
Label to appear as set under the Channel Installation Menu control.
KEYBOARD LOCK - Highlight KEYBOARD, then press the
Cursor Right (►) or Left (-^) buttons to select ON (or OFF).
“OFF’ disables all the buttons on the front panel of the TV from
manual operation. “ON” enables all buttons on the front of the TV
to operate.
ESP - Energy Saving Programmability (ESP) allows you to select
an amount of time (in hours) before the TV will automatically turn
OFF. The TV must remain on continuously during the amount of
time you select. If the power is switched off, the ESP timer will be
reinitialized. Highlight ESP, then press the Cursor Right (►) or Left
(•^) buttons to select the number of hours (1 - 99) before the TV
turns OFF. (You may also use the Number buttons to enter the num­
ber of hours).
AUDIO/VIDEO MUTE - See page 17 for details on how the TV
screen color can be set for blanked out channels.
WELCOME MESSAGE - Highlight WELCOME MESSAGE,
then press the Cursor Right (►) or Left (-^) buttons to display the
Welcome Message sub-menu. Within this Menu the Message can
be turned ON or OFF. Two lines of information (LINE 1, LINE 2)
can be displayed onscreen when the TV is powered ON. Use the
Cursor Up (A) and Down (T) buttons to scroll the characters,
symbols, and numbers available for the message. “CLEAR” will
cancel any message written.
CHANNEL GUIDE - Highlight CHANNEL GUIDE, then press
the Cursor Right (►) or Left (-^) buttons to select OFF, ON, or
POWER ON. If you select POWER ON, the Channel Guide (a list
of channels that are labeled) will appear when you turn the TV ON.
The Channel Guide will appear also when you press the CH GDE
button on the remote. If you select ON, the Channel Guide will
appear only when you press CH GDE. (Also, if you select POWER
ON or ON, make sure DISPLAYS is set to ALL.) If you select OFF,
the Channel Guide will not appear when you press CH GDE.
Remember, only the programmed channels that are Labeled (within
the Channel Installation Menu) will appear in the Channel Guide.
REMINDER - Highlight REMINDER, then press the Cursor Right
(►) or Left ) buttons to select ON. The current channel number,
and Label (if assigned), will appear onscreen at all times. (Make
sure CHANNEL DISPLAY control is set to ALL and Closed
Captioning is set to OFF. The “OFF” position allows the channel
number to appear briefly when the channel is selected, then it will
disappear.
2 DIGIT ENTRY - Highlight 3 DIGIT ENTRY, then press the
Cursor Right (►) or Left (-^ ) buttons to select ON (or OFF).
“ON” allows three digit channel number entries in order to select
channels above 99.
A/CH A/V SWITCH - Highlight A/CH AN SWITCH, then press
the Cursor Right (►) or Left (-^) buttons to select ON (or OFF).
“ON” allows the A/CH button on the remote to also select signal
input sources (ANTENNA, FRONT, AUX, S-VIDEO). “OFF” sets
A/CH to switch only between the last viewed and current channel
selections.
CC (Closed Captioning) - See page 18 for setup and use of
Closed Caption mode viewing. Note: CCl is the captioned mode
used most often by broadcasters. CC ON MUTE will automatically
display the Closed Caption mode when the remote’s MUTE button
is pressed.
SAVE CC - Highlight SAVE CC, then press the Cursor Right (►)
or Left (-4 ) buttons to select ON (or OFF). “ON” will save the CC
mode you have selected, even if the TV Power is turned OFF.
“OFF” will turn off the selected CC mode when the TV is turned
OFF.
V-CHIP MENU ITEM - Highlight V-CHIP MENU ITEM, then
press the Cursor Right (►) or Left (-^ ) buttons to select ON (or
OFF). “ON” allows for V-CHIP control items to be shown in the
Features Menu. “OFF” will not display the V-CHIP control options.
32