Air intake system – Can-Am BOMBARDIER DS650 User Manual

Page 104

Advertising
background image

AIR INTAKE SYSTEM

Air Filter
Cleaning/Draining

Periodically inspect air filter box drain
tube for liquid or deposits.

V02A0CY

1

3 2

1. Air filter box
2. Drain tube
3. Clamp

NOTE: If vehicle is used in dusty ar-
eas, inspect more frequently than
specified in MAINTENANCE CHART.

If liquid/deposits are found, squeeze
and remove the clamp.

Pull drain

tubes out then empty it.

CAUTION: Do not start engine
when liquid or deposits are found
in the drain tubes.

When liquid/deposits are found, the
air filter must be inspected/dried/re-
placed depending on its condition.

Remove air filter as explained below.

Air Filter Removal

CAUTION: Never remove or modify
any component in the air box. Al-
ways use genuine parts or suitable
equivalent when replacing air filter
and foam. The engine carburetion
is calibrated to operate specifical-
ly with these components. Other-
wise, engine performance degrada-
tion or damage can occur.

Remove seat.

Release latches and remove air filter
box cover.

V02A0DY

1

2

1. Latches
2. Air filter box cover

Remove screw driver cap by pushing
it inside of air box.

Loosen clamp and remove filter.

Remove foam.

102

_____________________

Advertising