Warning – Can-Am BOMBARDIER DS650 User Manual

Page 76

Advertising
background image

V02C3MY

1

LH SIDE OF DASH

1. Dipstick

With vehicle on a level surface, start
engine and let it running, around 1
minute, then stop engine. Check oil
level as follows:
1.

Unscrew dipstick out and wipe
clean.

2.

Screw dipstick until it bottoms.

3.

Remove dipstick and check oil lev-
el. It should be near or equal to
the upper mark.

V02C3NY

3

1

2

1. Full
2. Add
3. Operating range

To add oil, remove the dipstick. Place
a funnel into the dipstick tube to avoid
spillage.

Add a small amount of oil and recheck
oil level.

Repeat the operation until oil level
reaches the dipstick’s upper mark.
Do not overfill.

Properly tighten dipstick.

Engine Coolant

Recommended Coolant

Always use ethylene-glycol antifreeze
containing corrosion inhibitors specifi-
cally for internal combustion aluminum
engines.

Cooling

system

must

be

filled

with Bombardier premixed coolant
(P/N 219 700 362) or with distilled
water and antifreeze solution (50%
water, 50% antifreeze).

Coolant Level

ƽ

WARNING

Check coolant level with engine
cold. Never add coolant in cool-
ing system when engine is hot.

V02A08Y

2

1

3

1. Coolant reservoir
2. Radiator
3. RH front shock

With vehicle on a level surface, liquid
should be between MIN. and MAX.
level marks of coolant reservoir.

74

______________________

Advertising