Can-Am BOMBARDIER DS650 - Manual (Page 105)

V02A0ZY
2 1 3
1. Clamp
2. Air filter and foam
3. Screw driver cap
Pour cleaning solution (P/N 219 700
341) or an equivalent into a bucket.
Put the filter in to soak.
While filter soaks, clean inside of air
box.
Rinse air filter and foam with warm
water.
Squeeze foam to remove excess wa-
ter. Let dry air filter and foam thor-
oughly.
NOTE: Slight dust may be cleaned us-
ing a low-pressure airgun. Blow com-
pressed air backward of operating air
flow.
If air filter element or foam is dirty,
replace with a new one.
When the filter is dried, re-oil with air
filter oil (P/N 219 700 340) or an equiv-
alent.
Air Filter Installation
Properly reinstall removed parts in the
reverse order of their removal.
_____________________
103