COBY electronic DTV-102 - Manual (Page 4)

Introduction
1.4 Remote Control Description
Key Description
A description of the remote control button functions is shown in Figure 2 below.
Figure 2. Remote Control
Button Functions
Power Cord
Channel Selector
RF Signal Out
RF Signal In
RCA Output
Power Indicator CH - CH+ Remote Sensor Power
Introduction
1.5 Unit Description
A description of the buttons and the connectors on the main unit is shown in Figure 3 below.
POWER
Press to turn the unit on/off.
CHANNEL +/-
Press to skip channels.
Power Indicator
Under the normal working mode, it lights green.
Under the standby mode, it lights red.
Remote Sensor
Sense the remote signal.
RF Signal In
RF IN connector
Figure 3. Buttons on the Main Unit
RF Signal Out
RF OUT connector
Channel Selector
Switch between the channel 3 and the
channel 4
Power Cord
Plug into the power supply.
- 5 - - 6 -
1. AUDIO
Press to set the audio mode.
2. Number keypad
Press to input data.
3. ZOOM
Press to zoom the image.
4. Direction Buttons & MENU
While working with the system menu, press the
direction buttons to move between the options.
The up/down direction button works also as the
channel+/- button.
Press MENU to display the menu.
5. ENTER
Press to confirm settings.
6. GUIDE
Press to show the program guide.
7. Q.VIEW
Press to view the previous channel.
8. SIGNAL
Press to display the signal quality information.
9. POWER
Press to turn on/off the player.
10. Button
Press to display the digital input field.
11. EXIT
Press to back up/exit the menu.
12. INFO
Press to show the current working status.
13. CH-LIST
Press to show the channel list.
14. CCD
Press to set the closed caption.
14
7
8
1 9
10
2
6
3
4
13
5
12
11