Canon A2100 IS - Manual (Page 106)

106
You can customize convenient and commonly used functions from the 3
tab (p. 46) .
Turning Off the Start-up Image
You can turn off the start-up image that displays when you turn on the
camera.
● Select [Start-up Image], then press the qr
buttons to select [Off].
Turning off the Power Saving Function
You can set the power saving function (p. 41) to [Off]. Setting it to [On] is
recommended to save battery power.
● Select [Power Saving], then press the m
button.
● Press the op buttons to select [Auto Power
Down], then use the qr buttons to select [Off].
● If you set the Power Saving function to [Off],
be careful not to forget to turn off the camera
after use.
Setting the Screen Shut-Off Time
You can adjust the time the screen takes to shut off automatically (p. 41) .
This also works when [Auto Power Down] is set to [Off].
● Select [Power Saving], then press the m
button.
● Press the
op buttons to select [Display Off],
then use the qr buttons to select a time.
● In order to save battery power, it is
recommended to select less than [1 min.].
Changing Functions