Canon A2100 IS - Manual (Page 118)

118
If error messages appear on the LCD monitor, try one of the following
solutions.
No memory card
• The memory card is not installed in the correct direction. Install the memory card
in the correct direction
(p. 12) .
Card locked!
• The SD memory card or SDHC memory card’s write protect tab is set to “Lock”.
Unlock the write protect tab
(p. 15) .
Cannot record!
• You attempted to shoot an image without a memory card, or with a memory card
installed incorrectly. Install the memory card in the correct direction when
shooting
(p. 12) .
Memory card error (p. 50)
• If this error message appears even when using the supplied memory card,
contact your Canon Customer Support Help Desk as there may be a problem
with the camera.
Memory card full
• There is not enough free space on the memory card to shoot (pp. 20 , 51 , 63 ,
75) or edit images (pp. 98 – 100) . Erase the images (pp. 24 , 97) to open space
for new images, or insert an empty memory card (p. 12) .
Change the batteries (p. 12)
No image.
• There are no images recorded on the memory card that can be displayed.
Protected! (p. 96)
Unidentified Image/Incompatible JPEG/Image too large./RAW
• Unsupported images or data, or corrupted image data cannot be displayed.
• Images manipulated on a computer, that have had their file name changed, or
have been taken with a different camera may not display.
Cannot magnify!/Cannot rotate/Cannot modify image/Unselectable
image.
• Incompatible images cannot be magnified (p. 94) , rotated (p. 97) , edited (pp. 98
– 100) or added to a print list (p. 102) .
• Images manipulated on a computer, that have had their file name changed, or
have been taken with a different camera may not be magnified, rotated, edited
or added to a print list.
• Movies cannot be magnified (p. 94) .
Too many marks.
• You selected more than 998 images to send in print settings. Select less than
998 images
(p. 102) .
List of Messages that Appear on the Screen