Canon A2100 IS - Manual (Page 94)

94
Move the zoom lever toward
k.
● The display will zoom in on the image and
will appear. If you continue to hold
the zoom lever, it will continue to zoom in
up to a factor of 10x.
● If you press the opqr buttons, you can
move the location of the displayed area.
● Move the zoom lever toward g to zoom
out or return to Single Image Playback.
● When appears on the screen,
press the m button to switch to .
Press the qr buttons to switch between
images at the same level of magnification.
Press the
m button again to return to
.
You can select from three transition effects when switching between images
in single image playback.
Select [Transition].
● Press the n button and select the 1
tab, then select [Transition] and use the
qr buttons to select a transition effect.
● Press the n button to accept the
setting.
k Magnifying Images
Approximate Location
of Displayed Area
+ Changing Image Transitions
Switches between images without a transition effect.
Fades one image out and the next in.
Slides images left or right when the qr buttons are pressed.