Zoom H4n - Manual (Page 135)

Utility: How to use H2 and H4 SD car
ds
134
When you use the SD cards for H2 and H4 in the H4n, you can move their files and projects to
the H4n.
6-09 Utility: How to use H2 and H4 SD cards
1
Insert SD card for H2/H4 unit into H4n and
boot up the unit.
2
Select MOVE FILES and
<YES>, and press.
• The stereo files of H2/H4 and the projects of H4 will be
moved to the H4n stereo folders and MTR projects.
• After moving to H4n, those SD cards are not recognized in
H2/H4 unit.
• The projects move in order from the lowest numbered to
the highest numbered project.
• When the H4n has more than 1000 projects in the unit
after transfer, the unit says,
“Project Full ! ” and stop moving.
• You must reduce the project
number in H4n and continue the
transfer.
NOTE:
"File Name Exists!"
If there is the same file name in the moving folder, operate
<RENAME> work.
HINT:
Start booting up
it is displayed
for H4 as H4.
Ref. ☞ < FILE RENAME> P.109