K-Edge K13-020-31.8 - Manual (Page 2)

Tools/Items Required:
 Metric Allen Set (3mm for mounting bolts)
 Torque wrench (Minimum 2 N-m)
Installation Steps:
(Installation for Double crank set’s)
1. Place K-Edge Clamp below front derailleur clamp and lightly tighten the clamp bolt.
2. Slide the chain catcher pad onto the clamp and lightly tighten. See image below:
3. Center the clamp on the seat tube and check for proper clearance of chain catcher pad from the chain and chainring. (XL
pads are long enough to make contact with the chainring bolts if not given the proper distance between the pad and the
chain.) The bottom of the pad should sit just below the chain links and should have approximately 0.5mm clearance
between chain catcher pad and chain by sliding the pad towards the chain. See images below for reference: