Kenton Pro-DCB Mk3 - Manual (Page 4)

4
Below is a list of parameters available to edit. The letters in square brackets show
(where applicable) what will be displayed in the parameter 7-segment LED.
Menu
number Parameter
(default)
0
MIDI receive channel (default: 1)
Range
1 to 16 (and off)
- Sets the MIDI receive channel.
1
MIDI transmit channel (default: 2)
Range
1 to 16 (and off)
- Sets the MIDI transmit channel.
2 AUX controller number (default: 16)
- Sets which MIDI controller will control the auxiliary output.
The following can be selected;
Off
[Of]
Pitch bend [Pb]
Velocity [VL]
Aftertouch
[Af]
MIDI controllers 0-120
3 AUX minimum value (default: 0)
Range
0 to 127
Sets the level for the Auxiliary output when the MIDI controller source is at its minimum. 10 units
correspond to approximately 1 volt.
N.B. - the aux minimum can be set above the max, in which case the controller will work in reverse
4
AUX maximum value (default: 90)
Range 0 to 127
- Sets the level for the Auxiliary output when the MIDI controller source is at its maximum.
PARAMETERS