Keri Systems HPP-100 - Manual (Page 15)

HPP-100 Hand-Held Programmer
Revision 3.3 9
checking for that card, allowing free access at any time. Time zones 1 through 5 are
user programmable. Time zone 6 is reserved for network use. Time zone 7 is used to
disable time zone access for a card (called the “Never” time zone).
NOTE: When using a PC host system for programming, you can program a greater
number of time zones to provide a greater degree of flexibility.
Standard Commands
Standard Commands are used for setting system time and date, event timing, card management,
and printing operations.
Timing Functions
Set the Date [G]
The Date is set in a two digit, month / day / year format. Two digits are required for each
entry; for example, the month of July is coded as ‘07’ and the fourth day is coded as ‘04.’
Example . . . to set the date as July 4, 1995:
Press . . . [7] [0] [7] [0] [4] [9] [5] [SEND]
SYSTEM DATE
M: 0 7 D: 0 4 Y: 9 5
Set the Time [G]
The Time is set in a two digit, hours / minutes format. Two digits are required for each
entry; for example, 7:15 A.M. is coded as ‘07’ ‘15.’
Example . . . to set the time as 7:15 P.M.:
Press . . . [8] [1] [9] [1] [5] [SEND]
SYSTEM TIME
H: 1 9 M: 1 5