Keri Systems HPP-100 - Manual (Page 21)

HPP-100 Hand-Held Programmer
Revision 3.3 15
Change the Time Zone for Consecutive Cards [N]
Changing the Time Zone for Consecutive Cards allows the time zone for consecutive
cards to be changed to a new value. You must know the slot numbers for the cards to be
changed and they must be consecutive slot numbers.
Example . . . to change the time zone for consecutive cards in slots 10 through 20 to time
zone 2:
Press . . . [3]
CHANGE LEVEL
#: _ _ _ _ TO #: _ _ _ _
Press . . . [0] [0] [1] [0] [ZIP] [0] [0] [2] [0]
(the beginning slot number to
the ending slot number - all
for the new time zone)
[LEVEL] [ZIP]
#: 0 0 1 0 TO #: 0 0 2 0
Press . . . [LVL]
CHANGE LEVEL
LEVEL: _
Press . . . [2] (the time zone for all cards in
the batch to follow)
[SEND] [CLEAR]
LEVEL: 2
Press . . . [SEND]
Printing Functions
NOTE: All printing commands assume a serial printer is connected to the Master Control
Unit.
Verify a Card [G]