Keri Systems EntraGuard Titanium Quick Start - Manual (Page 8)

EntraGuard
®
Titanium Telephone Entry Controller
Quick Start Guide
Page 8 of 26 P/N: 01962-001 Rev. D
4.5 Connecting a General Purpose Input
The general-purpose input is used in conjunction with the programmable input/output feature of the Doors access control
software. There are two possible uses for the general-purpose input.
• the master controller may be configured for either Global Unlock (see Figure 7) or Auxiliary A-door RTE (see Figure
8)
• the slave unit can only be configured for Auxiliary A-door RTE (see Figure 8)
Make the following connections for a Global Unlock input. (For a master controller only.)
Figure 7: Global Unlock Input Connections
Make the following connections for an Auxiliary RTE A-door input.
Figure 8: Auxiliary A-Door RTE Input Connections