Keri Systems EntraGuard Bronze Residence Guide - Manual (Page 3)

EntraGuard Bronze
1530 Old Oakland Road, Suite 100 01911-003 Rev. C
San Jose, CA 95112 USA
(800) 260-5265 (408) 451-2520 FAX (408) 441-0309
Web: http://www.kerisys.com E-mail: [email protected]
Page 3 of 14
Telephone Entry
Residence Guide
This guide is designed to assist residents in programming and using the EntraGuard Bronze
Residential Telephone Entry System. For more detailed information or questions contact your
installer.
1.0 Standard Operation
There are six standard operating modes used by the EntraGuard Bronze telephone entry system.
• Visitor Call – when an arriving visitor requests entry.
• Call Waiting – if you are already on the telephone when a visitor entry request is made.
• Call Forwarding – designating a telephone number to which an entry request is routed when you
know you will not be home.
• Remote Connection – allows you to connect to the EntraGuard Bronze unit from the residence
telephone and program the unit.
• Gate Operation from the EntraGuard Bronze Unit – allows you to directly operate a gate from
the EntraGuard Bronze.
• Gate Operation from the Residence Telephone – allows you to directly operate a gate from the
residence telephone.
1.1 Visitor Call
The Visitor Call command allows an arriving visitor to request entry by calling the residence
telephone through the EntraGuard Bronze unit.
1. An arriving visitor notifies the residence by pressing the “Call” key.
2. The residence telephone rings with the programmed ring pattern and number of rings.
3. When the residence telephone is answered, it connects to the EntraGuard Bronze unit and
conversation can begin.
4. The connection is automatically disconnected after a programmed amount of time (the default
time is 1 minute). The unit sounds a brief tone to warn both parties with a 3 second warning of
the impending disconnection.
5. The connection time can be extended on the residence telephone by pressing the key.
6. Communication can be terminated immediately and entry denied at any time by pressing the
key.
7. Communication can be terminated immediately and entry granted (by opening the gate) by
entering the desired gate activation code on the residence telephone keypad. When the code is
entered, communication with the unit is terminated and the desired gate relay is activated for the
programmed amount of time.