KERN & SOHN CPB 30K5DM - Manual (Page 25)

F9 Grv

Gravity
not documented
F10 bEP
Audio signal
ok* Signal sound, when the load is within the set range
Low Signal sound, when the load is below the lower limit value
nG Signal sound, when the load is beyond the set range
HiGH Signal sound, when the load is above the upper limit value
F11 t n

P-tArE Always use this setting
o-tArE
F12 rSt Reset to default setting
F13 bEE off Acoustic signal when pressing button
on
F14 AUW off Automatic correction of reference weight
on
CPB-N / CPB-DM-BA-e-1424 26