1 tolerance check for target quantity – KERN & SOHN CPB 30K5DM User Manual
Page 38
10 Weighing to target quantity or target weight and tolerance check
An acoustic signal is sounded as soon as the number of items placed or a certain
weight value reaches or exceeds/drops below a pre-set limit (depending on the
settings in menu F10)
Options:
• OK Signal sound, when the load is within the set range
• Low Signal sound, when the load is below the lower limit value
• NG Signal sound, when the load is beyond the set range
• High Signal sound, when the load is above the upper limit value
10.1 Tolerance check for target quantity
Select target number mode:
Keep
pressed, the set mode will
appear
Check psc - Tolerance check for target item
number
Press
Check off – Tolerance check switched off
Press
Check net -: Tolerance check for target
weight
CPB-N / CPB-DM-BA-e-1424
39