Instruction manual fh, Sauter gmbh – KERN & SOHN FH 100K User Manual

Page 2

Advertising
background image

Sauter GmbH

Ziegelei 1
D-72336 Balingen
E-Mail: [email protected]

Tel: +49-[0]7433- 9933-0
Fax: +49-[0]7433-9933-149
Internet: www. kern-sohn.com

Instruction Manual

FH

FH_SO-BA-e-1217

2

3.

Electrical Power Supply


Either by rechargeable battery or current power supply

Current power supply:

-

Connection by power adapter

-

Rechargeable

batteries

are

charged

simultaneously


Rechargeable battery pack for mobile applications:

-

Type: Ni 8.4V / 600 mAh

-

Charging time: approx 1 hour

4.

Technical Data


-

Accuracy: ± 0,5 % of Capacity

-

Data Sampling Rate: 2.000 Hz

-

Weight: 640 g


5.

Operation


Display

(1) Measuring Result
(2) Measuring Units
(3) Activation of PRINT Function
(4) Indication of power charging status

PEAK or AUTO-PEAK Mode

(5) Average value of stored peak values
(6) Force direction
(7) Occupancy of storing spaces
(8) AVERAGE- or Saving Mode


Operating keys


ON / OFF:

ON / OFF key
(For ON, press 1 sec.)

UNIT:

-

Press short:

Select unit:
N, kg or lb

-

Press for 2 sec.:

Display return



ZERO:

Three functions:
-

Zeros the measuring result (Tara function)

-

Cleans the peak value (in Peak mode)

-

Saves a setting (in SET mode


SET:

-

1 x Press: Upper Limit [HidT / Hi Lt]. To
change press: ▲ or ▼ (see section
High/Low Limit function)

-

1 x Press: Lower Limit [LodT]. To change
p

ress ▲ or ▼ (see section High/Low Limit

function )

-

1 x Press: Minimum limit to save peak
values in the instrument’s memory.
[LE.SET / Lo Pe].

Please see section „Min

Limit Peak Save“. To change press: ▲ or
▼ (Only in „Peak-Mode“ active) (see
section min. limit peak save)

-

1 x Press: Sets the Auto-STOP force value
that stops the movement of a test stand.
Adjustment of the force value. To change
press: ▲ or ▼ (only active in „Battery-
Mode“)


-

1 x Press: Sets the AUTO-OFF force value
that stops the movement of a test stand. To
change press: ▲ or ▼ (Only in „Battery-
Mode“ active)

-

1 x Press: Peak-Freeze-Time [PE.2E /
A.PE / HoldT]: Time period in which a peak
value is being shown in the display in sec.
To change press: ▲ or ▼

Hi Lt

Lo dT

Lo Pe

P.OFF

StoP

Advertising
This manual is related to the following products: