LABEC J-USRC - Manual (Page 5)

S AFETY S YMBOLS
This operation manual and this product use the following safety symbols.
Please keep in mind the meaning of each of the symbols to ensure safe use of the product and to
prevent any damages, accidents or problems resulting from negligence of these safety symbols.
(As using symbols may depend on the product not all of the symbols may be used.)
SAFETY
SYMBOLS
Indicates the possibility of personal injury or death.
Never fail to follow the operating procedure.
Do not proceed beyond a WARNING sign until the noted conditions
are fully met to satisfactory and understood.
Indicates the existence of possibility of damage to the product or to
the operator in operation.
Never fail to follow the operating procedure.
Indicates the existence of possibility of damage to the product or to
the operator in operation when cautions are not observed and
followed properly.
Indicates additional information such as general warning, caution,
risk of danger, and operating procedure.
When this mark is indicated on the product, refer the relevant section
of the Operation Manual.
S afety Precautions
The following safety precautions must be observed and followed to avoid fire hazard, electrical
shock, accidents and other failures. K eep them in mind and make sure that all the precautions are
observed and followed properly. LABORATORY EQUIPMENT Pty Ltd assumes no liability or any
responsibility against any damages, accidents or problems resulting from negligence of the
precautions.
Users
Only qualified personnel who understand the contents of this operation manual must
use this product.
If unit is operated by unqualified personnel personal injury may result.
Be sure to operate only under supervision of qualified personnel.
Purpose of use
If the product is to be used for purposes not described in this manual, contact your
LABORATORY EQUIPMENT PTY LTD agent in advance.
Laboratory Equipment Pty Ltd – Operation Manual J­USRC Shaker Page 5