LABEC J-USRC - Manual (Page 8)

[Figure 2: Main power switch]
4. Installation.
4.1 Precautions for Installation
● This equipment is designed and manufactured to operate properly only in use of rated
voltage. Refer to specifications section of this manual for rated voltage before installation.
● Use AC power cable that comes with (or installed to) the product.
● Do not touch the Power Cord wet handed.
● Avoid locations where the equipment is exposed to direct sunshine.
● Do not place the equipment in a corrosive atmosphere.
● Do not use the equipment in a flammable atmosphere.
● Do not use the equipment where ventilation is poor.
Laboratory Equipment Pty Ltd – Operation Manual J­USRC Shaker Page 8