LABEC Z-L-530 - Manual (Page 15)

5.1.3.4 Please wash the rotor with sponge or cotton bedewed with the neutral detergent, wash off the neutral
detergent with distilled water. Don't sprinkle or spray water on the rotor. Because the stay of liquid will result
in corrosion. To bottom up and dry is allowed after cleaning.
5.1.3.5 Remove the fragment out from centrifugal room with rags or tweezers.
5.1.3.6 Please paint the grease on the spindle motor and connect part between rotor and axle hole.
5.1.3.7 Please cut off the power and unplug the power connected to the backside of the machine before
removing the front shell of the machine. Power operation is not allowed. Prevent electric shock to any people
or damage of the machine.
Note: This operation can only be done by specially trained maintainer from our company.
5.1.3.9 Only accessories provided by our company can be used for this machine.
5.1.3.10 Please cut off the power when you needn't use the centrifuge.
5.1.3.11 The machine is a precision instrument and please keeps it away from moisture, shock, traverse or
rewind.
Fragile Upward Moisture-proof
Figure 7: Terms of transportation and storage
5.2 Maintenance responsible by our company.
Low-speed Table-top Centrifuge made by our company will be maintenance once a year by special
maintainer from our company. And the content of maintenance is as following:
l
Examination of electrical part.(Examination of internal circuit functions)
l Examination of stability of the resettlement of the centrifuge.
l Examination of electromagnetic locks and other security circuits.
l Examination of rotor locking device and spindle motor (driveshaft)
l Maintenance staff clean the rotor and check the performance.
l our company will charge when they provide on-site repair & maintenance service.
Details of charging amount will be told on the sales contract by both parties.
On the process of maintenance, if we find parts need to be replaced, it will be free of charge if in the
warranty period. Otherwise it will be charged.