LABEC Z-L-530 - Manual (Page 3)

Introduction
The copyright of this manual belongs to Our company. Nobody is allowed to re-print or
disseminate any information of the contents of this manual, including pictures and audio-visual
products. Equipment operators can copy some chapters of this manual, but it's only for internal
use. Such as the chapters of how to deal with emergency cases for the operators. From the
directory of the manual, you can find where are those chapters. If there is any damage of the
equipments caused by that the users don't follow the statements of “the using environment of
equipment", Our company will not be responsible for this.
In the case of without any proper notice, Our company has the right to amend the
contents of this using manual at any time.
Using Environment of Equipment
In order to ensure the safety of using the machines, the centrifuge may be
damaged by following factors:
－ Chemical effects;
－ Environmental impacts, including radiation of natural UV;
－ The corrosion and abrasion and wear of shield and other security components.
* House supply;
* Altitude: ≤2000m;
* The applicable temperature range for the instrument is: +5º~+40ºC;
* Relative humidity is ≤80%;
* The scope of power supply for the instrument is AC240V 50HZ/60HZ;
* Adequate ventilation should be available indoor;
* There isn't any vibration or airflow around which maybe effect the
performance of the instrument;
* There isn't any conductive explosive dust or corrosive dust around;